Gel TimeGT-I/GT-H_Shanghai Modern Environment Engineering Technique

Contact Us

Products*
Name*
Company*
Email*
Phone
Address
Message
Codes*

Gel Time

Product Number： GT-I/GT-H

Brand Name：MODERNER

Product Origin：上海

Purchasing Heat：495

Standard：

GT Gel Timer is used to measure Gel time of resin, adhesive, dry oil and elastic coating.

Click to see the big picture

Ⅰ.Function overview
II.Meets standards
III.Main Technical Parameters
IV. Operation videoV.Ordering Information:
Consultation price
Similar Products

Product Details

Ⅰ. Introduction:

GT Gel Timer is used to measure Gel time of resin, adhesive, dry oil and elastic coating.

This machine has two models: the general model (GT-I) and the heating model (GT-H). It has the advantages of digital display and simple operation, and can directly read the gel time at ambient temperature or heating temperature.

GT-I

GT-H

Ⅱ. Main Technical Parameters:

Type	GT-I Conventional type	GT-H Heating type
Maximum timing	99:99:99
Mixing speed	20rpm
Temperature setting	without	50~220℃ space 10℃ 125~425°F space 25°F
Use power supply	DC24V 60W	DC24V 220W
Attachment： External AC converter	AC100~240V 50/60Hz 60W	AC100~240V 50/60Hz 220W

Ⅲ. The key and indicator functions:

Type	GT-I Conventional type	GT-H Heating type
button	press	Short press	Long press
left button	Start or stop the motor.
Right button	Stop the motor running.	Start or stop heating	Enter the temperature setting state
GT-H heating type temperature setting state
button		Short press	Long press
left button		Switch degree-day to C or F
Right button		Switching heating temperature	Exit the temperature setting state
GT-H heated key indicator status
Keyboard indicator light	illumine	extinguish	glimmer
Left green light	in service	Manual stop during operation	The gel point stops automatically
Right red light	Heat on or temperature > 50℃ or temperature > 120°F	Heating off and closing Temperature < 50℃ Or temperature < 120°F.	without

Ⅳ. Operation Summary:

1. Pour the sample into a paper cup (aluminum foil dish for heating type) and put the paper cup into a fixing ring (aluminum foil dish for heating type is put into a heating pot).
2. Immerse the stirring wire into the sample and hang it in the spindle hole. Be careful not to touch the paper cup (or aluminum foil dish).
3. heating type can choose heating temperature and start heating. Note: the temperature of the heater is controlled by the instrument display, and the sample temperature in the aluminum foil dish will diffuse in the environment and be significantly lower than the heater temperature. Generally, the setting temperature should be about 40℃ or 100°F higher than the required temperature.
4. Start stirring, and the display will automatically start counting from 0:00:00.
5. After reaching the gel point, the stirring will automatically stop (the green indicator light of the heating type left button flashes, and it will automatically turn off if the heating is turned on).
6. Read the gel time on the display.