Welcome to Modern Instruments

Chinese

Tel:+86 13929571434

Product Details

Contact Us

  • Products*

  • Name*

  • Company*

  • Email*

  • Phone

  • Address

  • Message

  • Codes*

SFJ-400D/SFJ-750DLaboratory dissolver series£¨electric elevator£©

Laboratory dissolver series£¨electric elevator£©

Product Number£º SFJ-400D/SFJ-750D

Brand Name£ºMODERNER

Product Origin£º China

Purchasing Heat£º1477

Standard£º

Click to see the big picture

Product Details

¢ñ. Introduction:

SFJ series laboratory dissolver adopts inverter motor, has multifunction for sand milling, dispersing and mixing, is the ideal choice for chemical laboratory. It adopts motor of frequency control, heating is lower, there is no need for carbon brush; Frequency converter adopts multiloop frequency-changer speed button, direct digits display axis revolution, it is easy to operate; it is equipped with sand-milling disc¡¢dispersing blade and agitating blade¡£It can fit different testing need of laboratory. Ac inverter motor power at 550W or 750W. 

  

SFJ-400D 

  

 Material barrel with vacuum cover¡¢ foot switch£¨choose£©


SFJ-400D Detail drawing


SFJ-750D

 

SFJ-750D Detail drawing

 

¢ò. Main Technical Parameters:

Type

SFJ-400D

SFJ-750D

Power

550W

750W

Speed

0-7500rpm

0-7500rpm

Lifting mode

Electric elevator

Electric elevator

Shaft

210mm

210mm

Electrical Power

220V 50Hz / 60Hz

220V  50Hz / 60Hz

Overall Size

450×420×630mm

450×420×630mm

Packing size

580×4540×610mm

580×4540×610mm

Weight

24kg

28kg

Gross weight

27.7+4.10£¨charging barrel£©

30.3+4.10£¨charging barrel£©

 

¢ó. Use and maintenance:

1. Select an appropriate impeller and screw it onto the stirring shaft.
2. Loosen the lifting lock handle, adjust the height of the impeller and the bottom of the mixing drum (positioning can be done by positioning ring), and then raise the mixing shaft for feeding and placing the mixing drum. For electric lifting type, please use the up and down buttons on the left to lift the stirring shaft. In addition, please note that the stirring shaft will slide down to the lowest point under the downward force when the electric lifting main machine is powered off. This is a normal phenomenon.
3. Position and fix the mixing drum with Y-clamp.
4. Lower the mixing shaft to the appropriate position, cover the mixing drum cover, and tighten the lifting locking handle.
5. Make sure that the impeller does not touch the mixing drum, and then start the mixing. See "Operation Instructions of Inverter Panel" (attached) for details of inverter operation.
6. After stirring, lower the stirring speed appropriately and then press the stop button.
7. After each work, please clean and maintain the impeller, mixing drum and host equipment in time for subsequent use.
8. This machine is used in the chemical product test process. Before use, users should establish appropriate safety and health protection measures and determine rules and regulations according to relevant safety regulations. Safety issues related to contact with chemical raw materials should be established by users.
 

¢ô.Related accessories:

      

The order from left to right is: Dispersion Disk, Dissolver.Sand Milling Disc, Disperse Blades, Double Walled Container

 

¢õ. Operation video:

SFJ-400D

SFJ-750D



 

¢ö. Configuration list£º

Type

SFJ-400D

SFJ-750D

Machine

1

1

1.25L Mixing drum

1

1

φ45 Sandpan

1

1

φ60 Sandpan

1

1

φ50 Dispersed bladed disk

1

1

φ60 Dispersed bladed disk

1

1

Operation Instruction

1

1

Frequency converter instruction manual

1

1


¢÷. Ordering Information:

Type

Name

SFJ-400D

Automatic spraying workstation (explosion-proof)

SFJ-750D

Accessory

Dispersion Disk

φ30-100/120/150/200/300/500mm / customized

Sand Milling Disc

φ45/60/80/100/120mm

Disperse Blades

φ30-80/100/120/160mm / customized

Double Walled Container

0.25L/0.5L/1.25L/1.8L/2.9L / customized

 

¢ø. Documents:

 

 

Similar Products


Latest News