Ⅰ.Introduction：

The temperature of the test chamber is designed by the way of constant temperature and indirect temperature control of the outer environment box. The humidity between each chamber and the balanced inlet/exhaust channel are designed to prevent the pattern from interfering with each other when the gas is released in the pretreatment process. Key start mode, fully automatic operation, very suitable for wood-based panel and its production enterprise quality inspection.

XD-018/6PH-A2

XD-018/6PH-A2

XD-018/6PH-A2

XD-020/4PH-A2

XD-020/4PH-A2

Ⅱ. Characteristics：

1. The design of the multi-compartment structure can effectively improve the space occupancy rate of the site used by customers and the pre-treatment efficiency before the pattern detection. At the same time, it can make reasonable use and management of the space of the laboratory equipment.

2. the control of PLC+ touch screen man-machine surface intelligent control scheme management, human-machine exchange and meet friendly, operation position ergonomic design is reasonable, in the process of equipment operation in the internal environment of the temperature/humidity and all point parameters for real-time monitoring and data preservation. The historical data and historical curves of the parameters at all points in the whole preprocessing process can be checked in real time, or downloaded and saved to the computer for data analysis, viewing and archiving through mobile storage devices.

3. the thermal system design is reasonable, the balance heat source directly adopts the compression heat of the refrigeration system for proportional adjustment processing, the cooling method of the refrigeration unit adopts air cooling with high reliability, without the need for customers to provide the cooling tower and the cumbersome maintenance of the cooling tower in the late stage, stable performance, economic and energy saving.

4. the wide range of temperature/humidity setting in the balance box to meet the detection needs of multiple types of customers, a wide range of users in the diversified needs of style pretreatment.

5. The large-capacity artificial water storage tank is equipped with automatic water level monitoring and water replenishing function of pipe network, which can save frequent water filling in the room without pipe network water supply system in Party A's laboratory. Automatic water replenishing through the pre activated carbon filter and then into the storage tank.

6. The refrigerating unit adopts imported fully enclosed compressor, air cooling mode, low operating noise, high reliability, simple installation and debugging work at customer site.

7.The equipment comes with ventilation device, the customer site does not need to configure additional compressed air source, ventilation device using magnetic diaphragm air pump, oil-free compressed air cleanliness is high, the exit is set with activated carbon pre-filter, to ensure that the ventilation box background formaldehyde content will be lower, low noise, long service life and other characteristics.

Ⅲ. Compliance with standards:

    ENV717—1   

    ASTM D6007—02

    LY/T1612—2004
 

Ⅳ. Main Technical Parameters: 

Ⅴ. Configuration list：

Ⅵ. Ordering Information: 

Ⅶ. Documents: