Ⅰ. Introduction:

The coating thickness gauge can be used not only to measure non-magnetic coatings such as paint, varnish, enamel, chrome and galvanizing on ferromagnetism metal substrates such as steel or iron, but also measure non-conductive coatings such as paint, anodized layers or ceramic on non-magnetic metal substrates such as copper, aluminum, die cast zinc, brass etc. The gauge automatically identifies the substrate and switch measurement mode. It is widely used in manufacturing, metal processing, chemical industry, commodity inspection and other fields.
Standards for the product: DIN EN ISO 2808 Paints and Varnishes-Determination of Film Thickness

Ⅱ. Main Technical Parameters: 

Appearance display

Ⅲ. Product Advantages: 

1. No calibration, just zero adjustment.
2. One hand operation, only one button.
3. Fast measurement, 0.5s measuring interval.
4. Wear-proof ruby probe tip for long-term use.
5. The gauge automatically identify the substrate and switch measurement mode rapidly.
6. "Fe", "NFe", "Fe/NFe" three measurement modes can be set.
7. Measuring non-magnetic coatings on steel or iron and measure Non-conductive coatings on non-magnetic metal substrates in one gauge.
8. Thanks to the use of the most-advanced digital probe technology, these sensors are unsusceptible to interference and provide an excellent measuring accuracy. Even variations in temperature will not affect measurement and readings remain stable to ensure a very good reproducibility over the complete measuring range.

Ⅳ. Precaution:

1) The measurement should be point contact. It is strictly forbidden to slide the probe on the surface of the object.
2) During the measurement, the probe should be kept at the center of the point to be measured.
3) Keep away from strong magnets (magnets, stereos, etc.) and strong electromagnetic fields (transformers, induction cookers, etc.).
4) Zero adjustment is recommended before the gauge is used.
5) Please ensure that the surface of the object under test is clean, dust and dirt on the surface to be tested will affect the measurement accuracy.
6) When the screen display low battery, new battery should be used.

Ⅴ. Related Accessories:  

Ⅵ. Ordering Information:

Ⅶ. Documents: