Ⅰ. Application:

SHG Wet Film Thickness Gauge(Comb Type):
Wet Film Thickness Gauge(Comb Type) produced by company is a tool for determining the wet film thickness of paint and varnish during application.

 

 

 

YQH Wet Film Thickness Gauge(Wheel type):
Wheel Type Wet Film Thickness Gauge(Wheel type) produced by our company is a tool for determining the wet film thickness of paint and varnish during application. The gauge is not only on the smooth surface but also on the curved surface. It gives high accurate measurement.

 

 

  

 

 

 

 

NHG Wet Film Thickness Gauge(Handle):
Wet Film Thickness Gauge (Handle) produced by company is a tool for determining the wet film thickness of paint and varnish during application.

 

 

Ⅱ. Main Technical Parameters:

SHG Wet Film Thickness Gauge(Comb Type):

YQH Wet Film Thickness Gauge(Wheel type):

NHG Wet Film Thickness Gauge(Handle type):

 Ⅲ. Application:

SHG/NHG Wet Film Thickness Gauge(Comb / Handle Type):
After coating, immediately push the comb gauge perpendicularly into the leveling film, then remove the comb gauge from the coating. The wet film thickness will fall between the clearance of the shortest tab that is wet and the clearance of the next shortest dry tab. Using the same method, retest twice to get a representative result within certain range.
After application, clean and dry the wet film thickness gauge, put it into the leather case. If found tab damage and wear, modify tooth profile or replace the gauge.
YQH Wet Film Thickness Gauge(Wheel type):
After coating, immediately push the comb gauge into the working surface, make the two sides of reference surface simultaneously touch the reference plate, turn the wheel gauge one circle, then remove it from the coating, observe a position where the middle circumference surface touches the coatings. The wet film thickness will fall on the maximum value corresponding to the division on the end face. Measure several times to gain an average value by using the same method so as to get a representative result.
After application, clean and dry the wheel gauge, put it into a box.

Ⅳ. Operation video:

Ⅴ. Configuration list：

Ⅵ. Ordering information:

SHG Wet Film Thickness Gauge(Comb Type):

YQH Wet Film Thickness Gauge(Wheel type):

NHG Wet Film Thickness Gauge(Handle type):

Ⅶ. Documents: