Ⅰ. Material:

Stainless steel.

Ⅱ. Specification:

Ranges of measurement: 0-2500μm;
Graduation: 100μm.
Packing size:  GLH 510×115×60mm, GLQ 275×130×40mm
Gross weight: GLH  4.2kg,  GLQ  0.53kg
 

Ⅲ. Precision:

±3%
 

Ⅳ. Application:

Clean the base plate and knife with solvent before using, mopping and cleaning with clean tissue. Test sample shall be blended by a spatula. The sample shall be blended homogeneously, then putting sample on the slot of base plate. It is suitable for filling with a little surplus sample on the slot, then holding the spatula with thumb, middle finger of both hand. Horizontally put a spatula on the upper end of base plate, make a spatula vertical on the base plate, with a suitable speed scraping the spatula from a deep slot to a shallow slot, make sample full on the slot, not remain surplus sample on the surface of base plate.
 

Ⅴ. Note:

a)Don’t scratch base plate and surface of spatula.
b)Clean and coat antirusting agent after using.
c)Periodically check a knife-edge and flatness of base plate. If found attrition or unflat, it should be calibrated before it can be used.
  

Ⅵ. Configuration list：

Ⅶ. Ordering information: 

Ⅷ. Documents: